View 74LVC3G17_19586.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
Rev. 03 -- 31 January 2005 Product data sheet
1. General description
The 74LVC3G17 is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device as translator in a mixed 3.3 V and 5 V environment. This device is fully specified for partial power-down applications using Ioff. The Ioff circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74LVC3G17 provides three non-inverting buffers with Schmitt-trigger action. It is capable of transforming slowly changing input signals into sharply defined, jitter-free output signals.
2. Features
s s s s Wide supply voltage range from 1.65 V to 5.5 V 5 V tolerant input/output for interfacing with 5 V logic High noise immunity ESD protection: x HBM EIA/JESD22-A114-B exceeds 2000 V x MM EIA/JESD22-A115-A exceeds 200 V. 24 mA output drive (VCC = 3.0 V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Multiple package options Specified from -40 C to +85 C and -40 C to +125 C.
s s s s s s
3. Applications
s Wave and pulse shapers for highly noisy environments.
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
4. Quick reference data
Table 1: Quick reference data GND = 0 V; Tamb = 25 C. Symbol tPHL, tPLH Parameter propagation delay input nA to output nY Conditions VCC = 1.8 V; CL = 30 pF; RL = 1 k VCC = 2.5 V; CL = 30 pF; RL = 500 VCC = 2.7 V; CL = 50 pF; RL = 500 VCC = 3.3 V; CL = 50 pF; RL = 500 VCC = 5.0 V; CL = 50 pF; RL = 500 CI CPD
[1]
Min [1] [2]
Typ 5.6 3.7 3.8 3.6 2.7 3.5 16.3
Max -
Unit ns ns ns ns ns pF pF
input capacitance power dissipation VCC = 3.3 V capacitance per buffer
-
CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. The condition is VI = GND to VCC.
[2]
5. Ordering information
Table 2: Ordering information Package Temperature range 74LVC3G17DP -40 C to +125 C 74LVC3G17DC -40 C to +125 C 74LVC3G17GT -40 C to +125 C Name TSSOP8 VSSOP8 XSON8 Description plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm Version SOT505-2 Type number
plastic very thin shrink small outline package; 8 leads; SOT765-1 body width 2.3 mm plastic extremely thin small outline package; no leads; SOT833-1 8 terminals; body 1 x 1.95 x 0.5 mm
6. Marking
Table 3: Marking codes Marking code V17 V17 V17
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Type number 74LVC3G17DP 74LVC3G17DC 74LVC3G17GT
9397 750 14544
Product data sheet
Rev. 03 -- 31 January 2005
2 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
7. Functional diagram
1
1A
1Y
7
1
7
2
3Y
3A
6
6
2
3
2A
2Y
001aab107
5
3
5
001aab108
Fig 1. Logic symbol
Fig 2. IEC logic symbol
A
Y
001aab109
Fig 3. Logic diagram
8. Pinning information
8.1 Pinning
3G17
1A 1A 3Y 2A GND 1 2 3 4
001aab106
1
8
VCC
8 7
VCC 1Y 3A 2Y
3Y
2
7
1Y
3G17
6 5
2A
3
6
3A
GND
4
5
2Y
001aac023
Transparent top view
Fig 4. Pin configuration TSSOP8 and VSSOP8
Fig 5. Pin configuration XSON8
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
3 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
8.2 Pin description
Table 4: Symbol 1A 3Y 2A GND 2Y 3A 1Y VCC Pin description Pin 1 2 3 4 5 6 7 8 Description data input data output data input ground (0 V) data output data input data output supply voltage
9. Functional description
9.1 Function table
Table 5: Input nA L H
[1] H = HIGH voltage level; L = LOW voltage level.
Function table [1] Output nY L H
10. Limiting values
Table 6: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol VCC VI VO IIK IOK IO ICC, IGND Tstg Ptot
[1] [2]
Parameter supply voltage input voltage output voltage input diode current output diode current output source or sink current VCC or GND current storage temperature power dissipation
Conditions
[1]
Min -0.5 -0.5 -0.5 -0.5 -65
Max +6.5 +6.5 +6.5 -50 50 50 100 +150 300
Unit V V V mA mA mA mA C mW
active mode Power-down mode VI < 0 V VO > VCC or VO < 0 V VO = 0 V to VCC
[1] [1] [2]
VCC + 0.5 V
Tamb = -40 C to +125 C
-
The input and output voltage ratings may be exceeded if the input and output current ratings are observed. When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation.
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
4 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
11. Recommended operating conditions
Table 7: Symbol VCC VI VO Tamb Recommended operating conditions Parameter supply voltage input voltage output voltage ambient temperature Conditions Min 1.65 0 0 -40 Typ Max 5.5 5.5 VCC +125 Unit V V V C
12. Static characteristics
Table 8: Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol VOL Parameter C [1] VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V VOH HIGH-level output voltage VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V ILI Ioff ICC ICC CI input leakage current power-off leakage current quiescent supply current VI = 5.5 V or GND; VCC = 5.5 V VI or VO = 5.5 V; VCC = 0 V VI = VCC or GND; IO = 0 A; VCC = 5.5 V VCC - 0.1 1.2 1.9 2.2 2.3 3.8 0.1 0.1 0.1 5 3.5 5 10 10 500 V V V V V V A A A A pF 0.1 0.45 0.3 0.4 0.55 0.55 V V V V V V LOW-level output voltage Conditions Min Typ Max Unit Tamb = -40 C to +85
additional quiescent VI = VCC - 0.6 V; IO = 0 A; supply current per pin VCC = 2.3 V to 5.5 V input capacitance
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
5 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
Table 8: Static characteristics ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol VOL Parameter LOW-level output voltage Conditions VI = VIH or VIL IO = 100 A; VCC = 1.65 V to 5.5 V IO = 4 mA; VCC = 1.65 V IO = 8 mA; VCC = 2.3 V IO = 12 mA; VCC = 2.7 V IO = 24 mA; VCC = 3.0 V IO = 32 mA; VCC = 4.5 V VOH HIGH-level output voltage VI = VIH or VIL IO = -100 A; VCC = 1.65 V to 5.5 V IO = -4 mA; VCC = 1.65 V IO = -8 mA; VCC = 2.3 V IO = -12 mA; VCC = 2.7 V IO = -24 mA; VCC = 3.0 V IO = -32 mA; VCC = 4.5 V ILI Ioff ICC ICC input leakage current power-off leakage current quiescent supply current VI = 5.5 V or GND; VCC = 5.5 V VI or VO = 5.5 V; VCC = 0 V VI = VCC or GND; IO = 0 A; VCC = 5.5 V VCC - 0.1 0.95 1.7 1.9 2.0 3.4 20 20 40 5000 V V V V V V A A A A 0.1 0.70 0.45 0.60 0.80 0.80 V V V V V V Min Typ Max Unit Tamb = -40 C to +125 C
additional quiescent VI = VCC - 0.6 V; IO = 0 A; supply current per pin VCC = 2.3 V to 5.5 V
[1]
All typical values are measured at Tamb = 25 C.
13. Dynamic characteristics
Table 9: Dynamic characteristics GND = 0 V. Symbol tPHL, tPLH Parameter C [1] see Figure 6 and 7 VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V VCC = 3.0 V to 3.6 V VCC = 4.5 V to 5.5 V CPD power dissipation VCC = 3.3 V capacitance per buffer
[2] [3]
Conditions
Min
Typ
Max
Unit
Tamb = -40 C to +85
propagation delay input nA to output nY
1.5 1.0 1.0 1.0 1.0 -
5.6 3.7 3.8 3.6 2.7 16.3
10.5 6.5 6.5 5.7 4.3 -
ns ns ns ns ns pF
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
6 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
Table 9: Dynamic characteristics ...continued GND = 0 V. Symbol tPHL, tPLH Parameter propagation delay input nA to output nY Conditions see Figure 6 and 7 VCC = 1.65 V to 1.95 V VCC = 2.3 V to 2.7 V VCC = 2.7 V VCC = 3.0 V to 3.6 V VCC = 4.5 V to 5.5 V
[1] [2] All typical values are measured at nominal VCC and Tamb = 25 C. CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. The condition is VI = GND to VCC.
Min
Typ
Max
Unit
Tamb = -40 C to +125 C 1.5 1.0 1.0 1.0 1.0 13.1 8.5 8.5 7.1 5.4 ns ns ns ns ns
[3]
14. Waveforms
VI nA input GND tPLH VOH nY output VOL
mnb072
VM
VM
tPHL
VM
VM
Measurement points are given in Table 10. Logic levels: VOL and VOH are typical output voltage drop that occur with the output load.
Fig 6. The input (nA) to output (nY) propagation delays Table 10: VCC 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V Measurement points Input VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC Output VM 0.5 x VCC 0.5 x VCC 1.5 V 1.5 V 0.5 x VCC
Supply voltage
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
7 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
VEXT VCC PULSE GENERATOR VI D.U.T. RT CL RL VO RL
mna616
Test data is given in Table 11. RL = Load resistor. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to output impedance Zo of the pulse generator.
Fig 7. Load circuitry for switching times Table 11: VCC 1.65 V to 1.95 V 2.3 V to 2.7 V 2.7 V 3.0 V to 3.6 V 4.5 V to 5.5 V Test data Input VI VCC VCC 2.7 V 2.7 V VCC tr, tf 2.0 ns 2.0 ns 2.5 ns 2.5 ns 2.5 ns Load CL 30 pF 30 pF 50 pF 50 pF 50 pF RL 1 k 500 500 500 500 VEXT tPLH, tPHL tPZH, tPHZ tPZL, tPLZ open open open open open GND GND GND GND GND 2 x VCC 2 x VCC 6V 6V 2 x VCC
Supply voltage
15. Transfer characteristics
Table 12: Transfer characteristics Voltages are referenced to GND (ground = 0 V). Symbol VT+ Parameter positive-going threshold Conditions see Figure 8 and 9 VCC = 1.8 V VCC = 2.3 V VCC = 3.0 V VCC = 4.5 V VCC = 5.5 V VT- negative-going threshold see Figure 8 and 9 VCC = 1.8 V VCC = 2.3 V VCC = 3.0 V VCC = 4.5 V VCC = 5.5 V 0.25 0.40 0.60 1.00 1.20 0.61 0.80 1.04 1.55 1.86 0.90 1.15 1.50 2.00 2.30 V V V V V 0.70 1.00 1.30 1.90 2.20 1.10 1.40 1.76 2.47 2.91 1.50 1.80 2.20 3.10 3.60 V V V V V Min Typ Max Unit Tamb = -40 C to +85 C [1]
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
8 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
Table 12: Transfer characteristics ...continued Voltages are referenced to GND (ground = 0 V). Symbol VH Parameter hysteresis (VT+ - VT-) Conditions see Figure 8, 9 and 10 VCC = 1.8 V VCC = 2.3 V VCC = 3.0 V VCC = 4.5 V VCC = 5.5 V Tamb = -40 C to +125 C VT+ positive-going threshold see Figure 8 and 9 VCC = 1.8 V VCC = 2.3 V VCC = 3.0 V VCC = 4.5 V VCC = 5.5 V VT- negative-going threshold see Figure 8 and 9 VCC = 1.8 V VCC = 2.3 V VCC = 3.0 V VCC = 4.5 V VCC = 5.5 V VH hysteresis (VT+ - VT-) see Figure 8, 9 and 10 VCC = 1.8 V VCC = 2.3 V VCC = 3.0 V VCC = 4.5 V VCC = 5.5 V
[1] All typical values are measured at Tamb = 25 C.
Min 0.15 0.25 0.40 0.60 0.70
Typ 0.49 0.60 0.73 0.92 1.02
Max 1.00 1.10 1.20 1.50 1.70
Unit V V V V V
0.70 1.00 1.30 1.90 2.20 0.25 0.40 0.60 1.00 1.20 0.15 0.25 0.40 0.60 0.70
-
1.70 2.00 2.40 3.30 3.80 1.10 1.35 1.70 2.20 2.50 1.20 1.30 1.40 1.70 1.90
V V V V V V V V V V V V V V V
16. Waveforms transfer characteristics
VO
VI
VT+ VH VT-
VO VI VT+
mnb154
VH VT-
mnb155
VT+ and VT- limits at 70 % and 20 %.
Fig 8. Transfer characteristic
9397 750 14544
Fig 9. Definition of VT+, VT- and VH
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
9 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
14 ICC (mA) 12 10 8 6 4 2 0 0 0.5 1 1.5
mnb071
2
VI (V)
VCC = 3.0 V.
Fig 10. Typical 74LVC3G17 transfer characteristic
17. Application information
mnb086
50 ICC (mA) 40
(1)
30
20
(2)
10
0 2 3 4 5 VCC (V) 6
Linear change of VI between 0.8 V to 2.0 V. (1) Positive-going edge. (2) Negative-going edge. All values given are typical unless otherwise specified.
Fig 11. Average ICC for 74LVC3G17 Schmitt trigger
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
10 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
18. Package outline
TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm SOT505-2
D
E
A
X
c y HE vMA
Z
8
5
A pin 1 index
A2 A1
(A3)
Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1.1 A1 0.15 0.00 A2 0.95 0.75 A3 0.25 bp 0.38 0.22 c 0.18 0.08 D(1) 3.1 2.9 E(1) 3.1 2.9 e 0.65 HE 4.1 3.9 L 0.5 Lp 0.47 0.33 v 0.2 w 0.13 y 0.1 Z(1) 0.70 0.35 8 0
Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 REFERENCES IEC JEDEC --JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16
Fig 12. Package outline SOT505-2 (TSSOP8)
9397 750 14544 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
11 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
SOT765-1
D
E
A X
c y HE vMA
Z
8
5
Q A pin 1 index A2 A1 (A3) Lp L
1
e bp
4
wM
detail X
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A max. 1 A1 0.15 0.00 A2 0.85 0.60 A3 0.12 bp 0.27 0.17 c 0.23 0.08 D(1) 2.1 1.9 E(2) 2.4 2.2 e 0.5 HE 3.2 3.0 L 0.4 Lp 0.40 0.15 Q 0.21 0.19 v 0.2 w 0.13 y 0.1 Z(1) 0.4 0.1 8 0
Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 REFERENCES IEC JEDEC MO-187 JEITA EUROPEAN PROJECTION
ISSUE DATE 02-06-07
Fig 13. Package outline SOT765-1 (VSSOP8)
9397 750 14544 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
12 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 1 x 1.95 x 0.5 mm
SOT833-1
1
2
3
b 4 4x L
(2)
L1
e
8 e1
7 e1
6 e1
5
8x
(2)
A
A1 D
E
terminal 1 index area 0 DIMENSIONS (mm are the original dimensions) UNIT mm A (1) max 0.5 A1 max 0.04 b 0.25 0.17 D 2.0 1.9 E 1.05 0.95 e 0.6 e1 0.5 L 0.35 0.27 L1 0.40 0.32 1 scale 2 mm
Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. OUTLINE VERSION SOT833-1 REFERENCES IEC --JEDEC MO-252 JEITA --EUROPEAN PROJECTION ISSUE DATE 04-07-22 04-11-09
Fig 14. Package outline SOT833-1 (XSON8)
9397 750 14544 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
13 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
19. Revision history
Table 13: Revision history Release date 20050131 Data sheet status Product data sheet Product data sheet Product data sheet Change notice Doc. number 9397 750 14544 9397 750 13793 9397 750 13332 Supersedes 74LVC3G17_2 74LVC3G17_1 Document ID 74LVC3G17_3 Modifications: 74LVC3G17_2 74LVC3G17_1
*
Changed: type number 74LVC3G17GT
20041103 20040624
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
14 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
20. Data sheet status
Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).
III
Product data
Production
[1] [2] [3]
Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
21. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
22. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
23. Contact information
For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com
9397 750 14544
(c) Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 03 -- 31 January 2005
15 of 16
Philips Semiconductors
74LVC3G17
Triple non-inverting Schmitt trigger with 5 V tolerant input
24. Contents
1 2 3 4 5 6 7 8 8.1 8.2 9 9.1 10 11 12 13 14 15 16 17 18 19 20 21 22 23 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 3 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 Functional description . . . . . . . . . . . . . . . . . . . 4 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 5 Static characteristics. . . . . . . . . . . . . . . . . . . . . 5 Dynamic characteristics . . . . . . . . . . . . . . . . . . 6 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Transfer characteristics. . . . . . . . . . . . . . . . . . . 8 Waveforms transfer characteristics . . . . . . . . . 9 Application information. . . . . . . . . . . . . . . . . . 10 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 14 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 15 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Contact information . . . . . . . . . . . . . . . . . . . . 15
(c) Koninklijke Philips Electronics N.V. 2005
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 31 January 2005 Document number: 9397 750 14544
Published in The Netherlands

▲Up To Search▲

Price & Availability of 74LVC3G17

	To Download 74LVC3G17 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .